Multicast Source Port Suppression Configuration - Huawei Quidway S3000-EI Series Operation Manual

Hide thumbs Also See for Quidway S3000-EI Series:
Table of Contents

Advertisement

Operation Manual - Multicast
Quidway S3000-EI Series Ethernet Switches
By default, no filtering configured on the switch.
Note:
Each VLAN of each port can only be
If no ACL rule is configured or the c
VLA
N, the filtering configured by this
Most devices just broadcast unknown multicast packets, s o to prevent the case
where multicast data flow is sent as unknown multica
this function is generally configured in combin
dropping function.
2.2.8 Mul
ticast Source Port Suppression Configuration
Th
is feature is to filter multicast packets on an unauthorized multicast source port,
pre
venting the user that connects to this port from setting multicast server privately.
I. En
abling/Disabling Multicast Source Port Suppression
Perform the following configuration in system view or Ethernet port view.
T
able 2-8 Enable/disable multicast source port suppression function
Enable
suppression
Disable
suppression
By default, the multicast source port suppression function is disabled on all ports.
In system view, if the interface-list parameter is not specified, it means that to
enable this function globally; that is, to enable this function on
switch; if the interfa
specified po
In Ethernet port view, the interface-list p
use this co
II.
Displaying a
A
fter the above configuration, perform the display command in any view, you can view
the running state of multicast source port suppression, and check the configura
result.
Operation
multicast
source
multicast
source
ce-li
st parameter is specified, it mean
rt.
mmand only to enable the feature o
nd Debugging Multicast S
Huawei Technologies Proprietary
Chapter 2 IGMP Snooping Configuration
configured with o
onfigured port doesn't belong to the specified
command will not take
st packets to the filtered ports,
ation with the unknown multicast
port
multicast-source
interface-list ]
port
undo
[ interface interface-list ]
arameter cannot be specif d, and you can
n the current po
ource Port Suppression
2-8
ne ACL rule.
effect.
Command
-deny
[
interface
multicast-source-deny
all ports of the
s that to e
nable it on the
ie
rt
tion

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents