Deactivate Contour Preparation (Execute) - Siemens SINUMERIK 828D Programming Manual

15.7

Deactivate contour preparation (EXECUTE)

Function
The command
the system returns to the normal execution mode.
Syntax
EXECUTE(<ERROR>)
Significance
EXECUTE
<FAULT>
Example
Program code
...
N30 CONTPRON(...)
N40 G1 X... Z...
...
N100 EXECUTE(...)
...
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
is used to deactivate the contour preparation and at the same time
EXECUTE
Command to terminate contour preparation
Variable for the fault feedback signal
Type: INT
The value of the variable indicates whether the contour was able to be
prepared error-free:
0 Errors
1 No error
User stock removal programs
15.7 Deactivate contour preparation (EXECUTE)
707