Overview Of Definable And Redefinable Attributes - Siemens SINUMERIK 828D Programming Manual

Subprogram calls in ACCESS files
To structure access protection further, subprograms (SPF or MPF identifier) can be called in
ACCESS files. The subprograms inherit the execution rights of the calling ACCESS file.
Note
Only access rights can be redefined in the ACCESS files. All other attributes have to
continue to be programmed/redefined in the corresponding definition files.
See also
General information about variables (Page 15)
1.1.11

Overview of definable and redefinable attributes

The following tables show which attributes can be defined (
which data types.
System data
Data type
Machine data
Setting data
FRAME data
Process data
Leadscrew error comp. (EEC)
Sag compensation (CEC)
Quadrant error compensation (QEC)
Magazine data
Tool data
Protection zones
Toolholder, with orientation capability
Kinematic chains
3D protection zones
Working area limitation
ISO tool data
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Init. value Limit values
--- ---
REDEF
---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Flexible NC programming
1.1 Variables
) and/or redefined (
DEF
Physical unit Access rights
--- REDEF
REDEF
---
--- REDEF
--- REDEF
--- REDEF
REDEF
---
--- REDEF
--- REDEF
--- REDEF
REDEF
---
--- REDEF
--- REDEF
REDEF
---
REDEF
---
--- REDEF
) for
REDEF
45