Three, Four And Five Axis Transformation (Traori); General Relationships Of Universal Tool Head - Siemens SINUMERIK 828D Programming Manual

6.2

Three, four and five axis transformation (TRAORI)

6.2.1

General relationships of universal tool head

Function
To obtain optimum cutting conditions when machining surfaces with a three-dimensional
curve, it must be possible to vary the setting angle of the tool.
The machine design to achieve this is stored in the axis data.
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
6.2 Three, four and five axis transformation (TRAORI)
Transformations
317