Siemens SINUMERIK 828D Programming Manual page 727

Operation Meaning
FLIN Feed linear variable
FMA Multiple feedrates axial
FNORM Feedrate normal to DIN 66025
3)
FOCOF Deactivate travel with limited
torque/force
FOCON Activate travel with limited torque/force
FOR Counter loop with fixed number of
passes
FP Fixed point: Number of fixed point to be
approached
FPO Feedrate characteristic programmed via
a polynomial
FPR Rotary axis identifier
FPRAOF Deactivate revolutional feedrate
FPRAON Activate revolutional feedrate
FRAME Data type for the definition of coordinate
systems
FRC Feedrate for radius and chamfer
FRCM Feedrate for radius and chamfer, modal
FROM The action is executed if the condition is
fulfilled once and as long as the
synchronized action is active
FTOC Change fine tool offset
FTOCOF Online fine tool offset OFF
3)
FTOCON Online fine tool offset ON
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
W Description see
1) 2)
PGAsl
m
Feedrate response (FNORM, FLIN, FCUB, FPO)
(Page 458)
PGsl
m
PGAsl
m
Feedrate response (FNORM, FLIN, FCUB, FPO)
(Page 458)
PGAsl
m
Travel to fixed stop (FXS, FXST, FXSW, FOCON,
FOCOF) (Page 613)
PGAsl
m
Travel to fixed stop (FXS, FXST, FXSW, FOCON,
FOCOF) (Page 613)
PGAsl
Count loop (FOR ... TO ..., ENDFOR) (Page 102)
PGsl
s
PGAsl
Feedrate response (FNORM, FLIN, FCUB, FPO)
(Page 458)
PGsl
PGsl
PGsl
PGAsl
Defining new frames (DEF FRAME) (Page 292)
PGsl
s
PGsl
m
PGAsl
Cyclically checking the condition (WHEN,
WHENEVER, FROM, EVERY) (Page 553)
PGAsl
Online tool offset (FTOC) (Page 589)
PGAsl
m
Online tool offset (PUTFTOCF, FCTDEF, PUTFTOC,
FTOCON, FTOCOF) (Page 404)
PGAsl
m
Online tool offset (PUTFTOCF, FCTDEF, PUTFTOC,
FTOCON, FTOCOF) (Page 404)
Tables
16.1 Instructions
727