Siemens SINUMERIK 828D Programming Manual page 788

Glossary
Auxiliary functions
Auxiliary functions enable → part programs to transfer → parameters to the → PLC, which
then trigger reactions defined by the machine manufacturer.
Axes
In accordance with their functional scope, the CNC axes are subdivided into:
● Axes: interpolating path axes
● Auxiliary axes: non-interpolating feed and positioning axes with an axis-specific feed rate.
Axis address
See → Axis identifier
Axis identifier
Axes are identifed using X, Y, and Z as defined in DIN 66217 for a dextrorotatory, right-
angled → coordinate system.
Rotary axes rotating around X, Y, and Z are identified using A, B, and C. Additional axes
situated parallel to the specified axes can be designated using other letters.
Axis name
See → Axis identifier
Backlash compensation
Compensation for a mechanical machine backlash, e.g. backlash on reversal for ball screws.
Backlash compensation can be entered separately for each axis.
Backup battery
The backup battery ensures that the → user program in the → CPU is stored so that it is safe
from power failure and so that specified data areas and bit memory, timers and counters are
stored retentively.
Base axis
Axis whose setpoint or actual value position forms the basis of the calculation of a
compensation value.
788
Auxiliary axes are not involved in actual machining, e.g. tool feeder, tool magazine.
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning