Operators For Conditions And Actions - Siemens SINUMERIK 828D Programming Manual

Motion synchronous actions

10.2 Operators for conditions and actions

10.2 Operators for conditions and actions
Comparison
(==, <>, <, >, <=, >=)
Boolean operators
(NOT, AND, OR, XOR)
Bit-by-bit operators
(B_NOT, B_AND, B_OR, B_XOR)
Basic arithmetic operations
(+, -, *, /, DIV, MOD)
Mathematical functions
(SIN, COS, TAN, ASIN, ACOS, ABS, TRUNC,
ROUND, LN, EXP, ATAN2, POT, SQRT, CTAB,
CTABINV).
Indexing
Example
● Basic arithmetic operations used together
Multiplication and division are performed before addition and subtraction and bracketing of
expressions is permissible. The operators DIV and MOD are permissible for the data type
REAL.
Programming
DO $AC_PARAM[3] = $A_INA[1]-$AA_IM[Z1]
WHENEVER $AA_IM[x2] < $AA_IM[x1]-1.9 DO
$A_OUT[5] = 1
DO $AC_PARAM[3] = $INA[1]-4*SIN(45.7
$P_EP[Y])*R4
● Mathematical functions
Programming
DO $AC_PARAM[3] = COS($AC_PARAM[1])
556
Variables or partial expressions can be
compared in conditions. The result is
always of data type BOOL. All the usual
comparison operators are permissible.
Variables, constants or comparisons can
be linked with each other with the usual
Boolean operators.
The bit operators B_NOT, B_AND, B_OR,
B_XOR can be used.
Main run variables can be linked to one
another or to constants by forms of basic
computation.
Mathematical functions cannot be applied
to variables of data type REAL .
Indexing can be undertaken using main run
expressions.
Comments
; Subtraction of two main run
variables
; Subtraction of a constant from
variables
Constant expression, calculated
during preprocessing
Comments
;
;
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning