Siemens SINUMERIK 828D Programming Manual page 512

Axis couplings
9.2 Curve tables (CTAB)
Significance
CTABID
CTABISLOCK
CTABMEMTYP
CTABPERIOD
<p>
<n>
<memory location>
512
Returns the table number entered as the
specified memory.
Example:
returns the number of the first curve table in the
CTABID(1,"SRAM")
static NC memory. In this context the first curve table is the curve
table with the highest table number.
Note:
If the sequence of curve tables in the memory changes between
consecutive calls of
CTABID
with ,
CTABDEL CTABID(<p>,...)
the same number .
<p>
Returns the lock state of curve table number
0 Table is not locked
1 Table is locked by
2 Table is locked by active coupling
3 Table is locked by
-1 Table does not exist
Returns the memory location of curve table number
0 Table in the static NC memory
1 Table in the dynamic NC memory
-1 Table does not exist
Returns the periodicity of curve table number
0 Table is not periodic
1 Table is periodic in the leading axis
2 Table is periodic in the leading and following axes
-1 Table does not exist
Entry number in memory
Number (ID) of curve table
Specification of memory location (optional)
"SRAM" Static NC memory
"DRAM" Dynamic NC memory
Note:
If a value is not programmed for this parameter, the default memory
location set with
MD20905 $MC_CTAB_DEFAULT_MEMORY_TYPE is used.
th curve table in the
<p>
, e.g. due to the deletion of curve tables
can return a different curve table with
<n>
CTABLOCK
and active coupling
CTABLOCK
<n>
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
:
:
<n>
:
Job planning