Siemens SINUMERIK 828D Programming Manual page 718

Tables
16.1 Instructions
Operation Meaning
CT Circle with tangential transition
CTAB Define following axis position according
to leading axis position from curve table
CTABDEF Table definition ON
CTABDEL Clear curve table
CTABEND Table definition OFF
CTABEXISTS Checks the curve table with number n
CTABFNO Number of curve tables still possible in
the memory
CTABFPOL Number of polynomials still possible in
the memory
CTABFSEG Number of curve segments still possible
in the memory
CTABID Returns table number of the nth curve
table
CTABINV Define leading axis position according to
following axis position from curve table
CTABISLOCK Returns the lock state of the curve table
with number n
CTABLOCK Delete and overwrite, lock
718
W Description see
1) 2)
PGsl
m
PGAsl
Read curve table values (CTABTSV, CTABTEV,
CTABTSP, CTABTEP, CTABSSV, CTABSEV, CTAB,
CTABINV, CTABTMIN, CTABTMAX) (Page 513)
PGAsl
Define curve tables (CTABDEF, CATBEND)
(Page 502)
PGAsl
Delete curve tables (CTABDEL) (Page 508)
PGAsl
Define curve tables (CTABDEF, CATBEND)
(Page 502)
PGAsl
Check for presence of curve table (CTABEXISTS)
(Page 508)
PGAsl
Curve tables: Check use of resources (CTABNO,
CTABNOMEM, CTABFNO, CTABSEGID, CTABSEG,
CTABFSEG, CTABMSEG, CTABPOLID, CTABPOL,
CTABFPOL, CTABMPOL) (Page 518)
PGAsl
Curve tables: Check use of resources (CTABNO,
CTABNOMEM, CTABFNO, CTABSEGID, CTABSEG,
CTABFSEG, CTABMSEG, CTABPOLID, CTABPOL,
CTABFPOL, CTABMPOL) (Page 518)
PGAsl
Curve tables: Check use of resources (CTABNO,
CTABNOMEM, CTABFNO, CTABSEGID, CTABSEG,
CTABFSEG, CTABMSEG, CTABPOLID, CTABPOL,
CTABFPOL, CTABMPOL) (Page 518)
PGAsl
Curve tables: Determine table properties (CTABID,
CTABISLOCK, CTABMEMTYP, CTABPERIOD)
(Page 511)
PGAsl
Read curve table values (CTABTSV, CTABTEV,
CTABTSP, CTABTEP, CTABSSV, CTABSEV, CTAB,
CTABINV, CTABTMIN, CTABTMAX) (Page 513)
PGAsl
Curve tables: Determine table properties (CTABID,
CTABISLOCK, CTABMEMTYP, CTABPERIOD)
(Page 511)
PGAsl
Locking curve tables to prevent deletion and
overwriting (CTABLOCK, CTABUNLOCK)
(Page 510)
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning