Flexible NC programming
1.14 Interrupt routine (ASUB)
1.14.6
Fast retraction from the contour (SETINT LIFTFAST, ALF)
Function
For a
from the workpiece contour using fast retraction.
The further sequence is then dependent on whether the
interrupt routine in addition to
With interrupt routine:
Without interrupt routine:
Syntax
SETINT(<n>) PRIO=1 LIFTFAST
SETINT(<n>) PRIO=1 <NAME> LIFTFAST
118
instruction with
SETINT
After the fast retraction, the interrupt routine is executed.
Machining is stopped after fast retraction and an alarm is
output.
, when the input is switched, the tool is moved away
LIFTFAST
:
LIFTFAST
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
instruction includes an
SETINT
Job planning