Siemens SINUMERIK 828D Programming Manual page 732

Tables
16.1 Instructions
Operation Meaning
G751 Approach fixed point via intermediate
point
G810 , ..., G group reserved for the OEM user
3)
G819
G820 , ..., G group reserved for the OEM user
3)
G829
G931 Feedrate specified by traversing time
G942 Freeze linear feedrate and constant
cutting rate or spindle speed
G952 Freeze revolutional feedrate and
constant cutting rate or spindle speed
G961 Constant cutting rate and linear
feedrate
G962 Linear or revolutional feedrate and
constant cutting rate
G971 Freeze spindle speed and linear
feedrate
G972 Freeze linear or revolutional feedrate
and constant spindle speed
G973 Revolutional feedrate without spindle
speed limitation
GEOAX Assign new channel axes to geometry
axes 1 - 3
GET Replace enabled axis between
channels
GETACTT Gets active tool from a group of tools
with the same name
GETACTTD Gets the T number associated with an
absolute D number
GETD Replace axis directly between channels
GETDNO Returns the D number of a cutting edge
(CE) of a tool (T)
GETEXET Reading of the loaded T number
GETFREELOC Find a free space in the magazine for a
given tool
GETSELT Return selected T number
GETT Get T number for tool name
732
W Description see
1) 2)
s PGsl
PGAsl
Special functions for OEM users (OEMIPO1,
OEMIPO2, G810 to G829) (Page 272)
PGAsl
Special functions for OEM users (OEMIPO1,
OEMIPO2, G810 to G829) (Page 272)
m
m
m
PGsl
m
PGsl
m
PGsl
m
PGsl
m
PGsl
m
PGAsl
Replaceable geometry axes (GEOAX) (Page 664)
PGAsl
Axis replacement, spindle replacement (RELEASE,
GET, GETD) (Page 125)
FBW
PGAsl
Free assignment of D numbers: Determine T number to
the specified D number (GETACTTD) (Page 432)
PGAsl
Axis replacement, spindle replacement (RELEASE,
GET, GETD) (Page 125)
PGAsl
Free assignment of D numbers: Rename D numbers
(GETDNO, SETDNO) (Page 431)
FBW
FBW
FBW
FBW
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning