File And Program Management; Tool Offsets - Siemens SINUMERIK 828D Programming Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

File and Program Management

2.1 Program memory

Standard directories

Its standard complement of directories is as follows:

The following file types can be stored in the main memory:

Workpiece main directory (_N_WKS_DIR)

The workpiece main directory exists in the standard setup of the program memory under the

workpieces that you have programmed.

Workpiece directories (..._WPD)

To make data and program handling more flexible certain data and programs can be

grouped together or stored in individual workpiece directories.

A workpiece directory contains all files required for machining a workpiece. These can be

main programs, subprograms, any initialization programs and comment files.

The first time a part program is started, initialization programs are executed once, depending

on the selected program (in accordance with machine data MD11280

$MN_WPD_INI_MODE).

. The workpiece main directory contains all the workpiece directories for the

Data modules and macro modules

Standard cycles

Manufacturer cycles

Global subprograms

Main programs

Main program

Machine data

Setting data

Zero offsets/frames

Initialization files

Global user data

R parameters

Definitions for global user data and macros

Programming Manual, 07/2010, 6FC5398-2BP40-0BA0

Job planning

Show Quick Links

Table of Contents