Indirect Call Of A Program Programmed In Iso Language (Isocall) - Siemens SINUMERIK 828D Programming Manual

Flexible NC programming
1.25 Subprogram technique
Subprogram:
Program code
PROC CONTUR_1 ...
LABEL_1
N1000 G1 ...
...
LABEL_2
...
1.25.3.7

Indirect call of a program programmed in ISO language (ISOCALL)

Function
A program programmed in an ISO language can be called using the indirect program call
ISOCALL
mode becomes effective again at the end of the program. If no ISO mode is set in the
machine data, the subprogram is called in Siemens mode.
For further information about the ISO mode, see
References:
ISO Dialects Functional Description
Syntax
ISOCALL <program_name>
Significance
ISOCALL
<program name>
192
Comments
; Start label: Start of program part execution.
; End label: End of program part execution.
. The ISO mode set in the machine data is then activated. The original execution
: Keyword for an indirect subprogram call with which the ISO
mode set in the machine data is activated.
: Name of the program programmed in an ISO language (variable
or constant, type STRING)
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning