Activate Machine Data (Newconf) - Siemens SINUMERIK 828D Programming Manual

Flexible NC programming

1.17 Activate machine data (NEWCONF)

1.17 Activate machine data (NEWCONF)
Function
The
level active. The function can also be activated in the HMI user interface by pressing the "MD
data effective" softkey.
When the "NEWCONF" function is executed there is an implicit preprocessing stop; in other
words, path movement is interrupted.
Syntax
NEWCONF
Significance
NEWCONF
Cross-channel execution of NEWCONF from the part program
If changes are made to axial machine data from the part program and then activated with
NEWCONF
program channel.
Note
In order to ensure that all changes are applied, the
every channel in which the axes or functions affected by the changes to the machine data
are being calculated.
No axial machine data are effective for
An axial RESET must be performed for axes controlled by the PLC.
Example
Milling: Machine drill position with different technologies
Program code
N10 $MA_CONTOUR_TOL[AX]=1.0
N20 NEWCONF
...
132
command is used to set all machine data of the "NEW_CONFIG" effectiveness
NEWCONF
: Command for setting all machine data of the "NEW_CONFIG" effectiveness
level active
, will only activate the machine data containing changes affecting the part
NEWCONF
command must be executed in
NEWCONF
.
NEWCONF
Comments
; Change machine data.
; Activate machine data.
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning