Set/Delete Wait Markers (Setm, Clearm) - Siemens SINUMERIK 828D Programming Manual

10.4.25

Set/delete wait markers (SETM, CLEARM)

Function
Wait markers can be set or deleted in synchronized actions in order to e.g. coordinate
channels with one another.
Syntax
DO SETM(<marker number>)
DO CLEARM(<marker number>)
Significance
SETM
CLEARM
<marker number>
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Command to set the wait marker for the channel
The command can be programmed in the part program
SETM
and in the action component of a synchronized action. It sets
the marker (
<marker number>
command is applied.
Command to delete the wait marker for the channel
The command can be programmed in the part program
CLEARM
and in the action component of a synchronized action. It
deletes the marker (
<marker number>
the command is applied.
Wait marker
Motion synchronous actions
10.4 Actions in synchronized actions
) for the channel in which the
) for the channel in which
611