Siemens SINUMERIK 828D Programming Manual page 514

Axis couplings
9.2 Curve tables (CTAB)
CTABTMIN
CTABTMAX
<n>
<gradient>
<following axis>
<leasing axis>
<following value>
<leading value>
<approximate value>
<a>
<b>:
514
: Define following axis minimum value:
• In the entire definition range of the curve table
• In a defined interval
: Define following axis maximum value:
• In the entire definition range of the curve table
• In a defined interval
: Number (ID) of curve table
: The
function at the calculated position.
: Axis whose motion is to be calculated using the curve table
(optional)
: Axis providing the master values for the calculation of the following
axis motion (optional)
: Following axis value for reading the associated leading axis value
for
: Leading axis value:
• for reading the associated following axis value with
• for the selection of the curve segment with
: The assignment of a leading axis value to a following axis value
with
therefore, an approximate value for the expected leading axis
value as a parameter.
: Lower limit of the master value interval with
Upper limit of the master value interval with
Note:
The master value interval
curve table's definition range.
or
<a>
or
<a>
parameter returns the incline of the curve table
<gradient>
CTABINV
or
must not always be unique.
CTABINV
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
to
<b>
to
<b>
CTABSSV
CTABINV
CTABTMIN
CTABTMIN
to always has to be within the
<a> <b>
CTAB
/
CTABSEV
requires,
/
CTABTMAX
/
CTABTMAX
Job planning