Flexible NC programming
1.13 Program coordination (INIT, START, WAITM, WAITMC, WAITE, SETM, CLEARM)
Example: Program from workpiece
Program code
N10 INIT(2,"/_N_WKS_DIR/_N_SHAFT1_WPD/_N_CUT1_MPF")
Example: INIT command with relative path specification
Program
Program code
N10 INIT(2,"MYPROG")
110
/_N_MPF_DIR/_N_MAIN_MPF
Comments
; Select program /_N_MPF_DIR/_N_MYPROG_MPF in channel 2
is selected in channel 1
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Job planning