Siemens SINUMERIK 828D Programming Manual page 745

Operation Meaning
PREPRO Identify subprograms with preparation
PRESETON Set actual values for programmed axes
PRIO Keyword for setting the priority for
interrupt processing
PROC First operation in a program
PTP Point-to-point motion
PTPG0 Point-to-point motion only with G0,
otherwise CP
PUNCHACC Travel-dependent acceleration for
nibbling
PUTFTOC Tool fine offset for parallel dressing
PUTFTOCF Tool fine offset dependent on a function
for parallel dressing defined with
FCTDEF
PW B spline, point weight
QECLRNOF Quadrant error compensation learning
OFF
QECLRNON Quadrant error compensation learning
ON
QU Fast additional
(auxiliary) function output
R... Arithmetic parameter also as settable
address identifier and with numerical
extension
RAC Absolute non-modal axis-specific radius
programming
RDISABLE Read-in disable
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
W Description see
1) 2)
PGAsl
Identifying subprograms with preparation (PREPRO)
(Page 171)
PGAsl
Preset offset (PRESETON) (Page 296)
PGAsl
Assign and start interrupt routine (SETINT, PRIO,
BLSYNC) (Page 114)
PGAsl
Calling subroutine with path specification and
parameters (PCALL) (Page 193)
PGAsl
m
Cartesian PTP travel (Page 377)
PGAsl
m
PTP for TRANSMIT (Page 381)
PGAsl
Punching and nibbling on or off (SPOF, SON, PON,
SONS, PONS, PDELAYON, PDELAYOF, PUNCHACC)
(Page 647)
PGAsl
Online tool offset (PUTFTOCF, FCTDEF, PUTFTOC,
FTOCON, FTOCOF) (Page 404)
PGAsl
Online tool offset (PUTFTOCF, FCTDEF, PUTFTOC,
FTOCON, FTOCOF) (Page 404)
PGAsl
s
Spline interpolation (ASPLINE, BSPLINE, CSPLINE,
BAUTO, BNAT, BTAN, EAUTO, ENAT, ETAN, PW, SD,
PL) (Page 234)
PGAsl
Learn compensation characteristics (QECLRNON,
QECLRNOF) (Page 680)
PGAsl
Learn compensation characteristics (QECLRNON,
QECLRNOF) (Page 680)
PGsl
PGAsl
Predefined user variables: Arithmetic parameters (R)
(Page 19)
PGsl
s
PGAsl
Set read-in disable (RDISABLE) (Page 577)
Tables
16.1 Instructions
745