Siemens SINUMERIK 828D Programming Manual page 25

<access rights>
<name>
[<value_1>,
<value_2>,
<value_3>]
<init_value>
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
:
Access rights for reading/writing GUD via part program or OPI
(optional)
APRP
level>:
APWP
level>:
APRB
level>:
APWB
level>:
See "Attribute: Access rights (APR, APW, APRP, APWP, APRB,
APWB) (Page 40)"
: Name of variable
Note
• A maximum of 31 characters
• The first two characters must be a letter and/or an
• The $ sign is reserved for system variables and must not be
Specification of array sizes for 1- to max. 3-dimensional array
variables (optional)
:
: Initialization value (optional)
See "Attribute: Initialization value (Page 33)"
For the initialization of array variables:
See "Definition and initialization of array variables (DEF, SET,
REP) (Page 46)"
<protection Read: Part program
<protection Write: Part program
<protection Read: OPI
<protection Write: OPI
Protection
level
underscore.
used.
Flexible NC programming
1.1 Variables
Range of values: 0 ... 7
25