Preset Offset (Preseton) - Siemens SINUMERIK 828D Programming Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Coordinate transformation (FRAMES)

5.5 Preset offset (PRESETON)

Preset offset (PRESETON)

For special applications, it may be necessary to assign an already referenced machine axis

a new actual value using

coordinate system.

recommend that the function is only used for machine axes that do not require a reference

point. In order to restore the original machine coordinate system, the machine axis must be

re-referenced, e.g. using G74 (reference point approach).

References: Programming Manual Basics, Supplementary Commands, Reference point

approach (G74)

PRESETON(<axis>, <value>, ...)

Setting actual values via synchronized actions should only be implemented with the keyword

, the machine axis is in the "non-referenced" status. We therefore

. This corresponds to a zero offset in the machine

Preset actual value memory

Machine axis identifier

New actual value of the machine axis in the machine coordinate

Programming Manual, 07/2010, 6FC5398-2BP40-0BA0

Job planning

Show Quick Links

Table of Contents