Transfer Axis To Another Channel (Axtochan) - Siemens SINUMERIK 828D Programming Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Flexible NC programming

1.16 Transfer axis to another channel (AXTOCHAN)

Transfer axis to another channel (AXTOCHAN)

different channel. The axis can be moved to the corresponding channel both from the NC

part program and from a synchronized action.

AXTOCHAN(axis name,channel number[,axis name,channel number[,...]])

Significance

Channel number

Competing positioning axis and PLC controlled axis exclusively

A PLC axis cannot replace the channel as a competing positioning axis. An axis controlled

exclusively by the PLC cannot be assigned to the NC program.

Function Manual, Extended Functions; Positioning Axes (P2)

language command can be used to request an axis in order to move it to a

Request axis for a specific channel

Axis assignment in the system: X, Y, ... or entry of machine axis

names concerned. The executing channel does not have to be the

same channel or even the channel currently in possession of the

interpolation right for the axis.

Name of the channel to which the axis is to be assigned

Programming Manual, 07/2010, 6FC5398-2BP40-0BA0

Job planning

Show Quick Links

Table of Contents