Appendix 6 Compatible Devices With Sscnet (/H); Appendix 6.1 Servo Driver Vcii Series/Vph Series Manufactured By Nikki Denso Co., Ltd - Mitsubishi Electric QD77MS User Manual

Appendix 6 Compatible devices with SSCNET (/H)

Appendix 6.1 Servo driver VCII series/VPH series manufactured by Nikki Denso Co., Ltd.

The direct drive  DISC/  iD roll/  Servo compass/  Linear stages, etc. manufactured by
Nikki Denso Co., Ltd. can be controlled by connecting with the servo driver VCII
series/VPH series manufactured by the same company using SSCNET or
SSCNET /H.
Contact to Nikki Denso overseas sales office for details of VCII series/VPH series.
The details shown below explain about the "Connection with VCII series/VPH series".
[1] Connecting method
[2] Comparisons of specifications with MR-J4(W)-B/MR-J3(W)-B
[3] Precautions during control
[4] VCII series/VPH series detection error/warning
[1] Connecting method
(1) System configuration
The system configuration using VCII series/VPH series is shown below.
Simple Motion module
SSCNET
MR-J3BUS_M(-A/-B)
Servo driver
VC  series/
VPH series
SSCNET (/H)
cable
Appendix - 66
Appendices
Servo amplifier*
MR-J3(W)-BMR-J4(W)-B
QD77MS2 : Up to 2 axes
QD77MS4 : Up to 4 axes
QD77MS16 : Up to 16 axes