Deleting A Card - Simplex 4010 Installing And Operating Insructions

Adding, Deleting, or Modifying 4010 Cards,
Adding a Card (continued)

Deleting a Card

Technical Manuals Online! - http://www.tech-man.com
8. When first adding a 24-Point I/O or LCD Annuciator cards to the 4010, you
must choose an available address of 9 through 14. (The system
automatically picks the next available address.) When selecting 24IO or
LCD and then pressing Enter, the following figure appears.
Card=[09]
Card Type=LCD Card
9. Press <NEXT> or <PREVIOUS> to scroll through the available addresses,
select the appropriate address for your card, and then press Enter. Follow
the prompts to confirm this action.
Use the following steps to delete a card from the 4010 FACP.
1. Press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [PROGRAMMING] is displayed
and then press <ENTER>. A warning appears, indicating that the 4010 is
no longer in the Fire Alarm Operation mode.
Please Wait . . .
Fire Alarm Operation Suspended
3. Press <ENTER> to continue.
4. Press <NEXT> or <PREVIOUS> until <CONFIGURE CARDS> is
displayed and then press <ENTER>.
Caution: Deleting 4010 Cards also deletes any modes and SMPL
(Custom Control) programming associated with that
card.
5. After selecting Delete a 4010 Card as your option under the Configure
Cards menu, press <NEXT> or <PREVIOUS> to scroll through the cards
configured in the 4010 FACP.
6. When the card you wish to delete is displayed, press Enter.
7. Follow the prompts to confirm this action.
5-4
Continued
Continued on next page