Rs232/Modem Card; Rs232/Modem Card Status Points; Rs232/Modem Points - Simplex 4010 Installing And Operating Insructions

Front panel
Hide thumbs Also See for 4010:
Table of Contents

Advertisement

Hardware Points,

RS232/Modem Card

RS232/Modem Card Status
Points
Point
4-CS1
Missing Card
4-CS2
Wrong Card
4-CS3
Port A Disconnected
4-CS4
Port B Disconnected
4-CS5
Primary Telco
4-CS6
Secondary Telco
4-CS7
Port A Ground Fault
4-CS8
Port B Ground Fault

RS232/Modem Points

Technical Manuals Online! - http://www.tech-man.com
Continued
Either an RS232 Card or Modem Card may be added to the 4010 system. Even
though these cards are optional, if an RS232 or Modem card is configured, it
must reside at Card Address 4. There are two hardware points and eight card
status points associated with the both the RS232 card and Modem card.
Both the RS232 Card and the Modem Card have eight card status points
associated with them. The card status points described in this section apply to
either card. The following table describes the card status points for both the
RS232 or Modem card.
Table B-8. Card Status Points for RS232 or Modem Card
Label
This trouble indicates that the card is not communicating with the
master.
This trouble indicates that the card returned a card type as something
other than a RS232 or Modem card type (respectively).
If Port A is a supervised port, and disconnected, this point will indicate
this with a trouble.
If Port B is a supervised port, and disconnected, this point will indicate
this with a trouble.
This point indicates a trouble in the Primary Telco line (not presently
supported).
This point indicates a trouble in the Secondary Telco line (not
presently supported).
This point indicates a ground fault trouble on Port A (not presently
supported).
This point indicates a ground fault trouble on Port B (not presently
supported).
The RS232 and Modem cards have two hardware points associated with them.
Both of the RS232/Modem points are user configurable. However, the points
have no labels associated with them, because they cannot be viewed on the front
panel. Table B-9 is a list of the points on the RS232/Modem cards.
Description
B-8
Continued on next page

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents