Deleting Zam/Iam/Riam Idnet Point - Simplex 4010 Installing And Operating Insructions

Configuring ZAM/IAM/RIAM Points,
Deleting ZAM/IAM/RIAM IDNet
Point
Technical Manuals Online! - http://www.tech-man.com
Continued
Use the following steps to delete a ZAM/IAM/RIAM point from the 4010
FACP.
1. Press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [PROGRAMMING] is displayed
and then press <ENTER>. A warning appears, indicating that the 4010 is
no longer in the Fire Alarm Operation mode.
Please Wait . . .
Fire Alarm Operation Suspended
3. Press <ENTER> to continue.
4. Press <NEXT> or <PREVIOUS> until <CONFIGURE POINTS> is
displayed and then press <ENTER>.
5. Press <NEXT> or <PREVIOUS> to scroll through your choices until
<ZAMs/IAMs/RIAMs> is displayed and then press <ENTER>.
6. Use <NEXT> or <PREVIOUS> to scroll through your choices until
<DELETE IDNet POINT> is displayed and then press Enter.
Press <NEXT> or <PREVIOUS> to scroll through your list of IDNet
7.
points until the desired point is displayed and then press Enter.
8. Follow the prompts to confirm this action.
Caution: Any Custom Control equations and LED/Switch Modes
referencing the deleted point are also deleted.
6-8