Truealert Non-Addressable Horn Operation; Introduction; Setting The Truealert Non-Addressable Horn Option - Simplex 4010 Installing And Operating Insructions
Front panel
Hide thumbs
Also See for 4010:
- Applications manual (85 pages) ,
- Service manual (72 pages) ,
- User manual (9 pages)
Table of Contents
Advertisement
TrueAlert Non-Addressable Horn Operation
Introduction
Setting the TrueAlert Non-
Addressable Horn Option
Technical Manuals Online! - http://www.tech-man.com
The TrueAlert Non-Addressable Horn Operation option defines the way in which
TrueAlert Horns function when activated. The default function is Temporal.
Use the following steps to set the TrueAlert Non-Addressable Horn system option.
1.
Press <MENU>.
2.
Press <NEXT> or <PREVIOUS> until [PROGRAMMING] is displayed
and then press <ENTER>. A warning appears, indicating that the 4010 is
no longer in the Fire Alarm Operation mode.
3.
Press <ENTER> to continue.
4.
Press <NEXT> or <PREVIOUS> until <SYSTEM OPTIONS> is
displayed and then press <ENTER>.
5.
Press <NEXT> or <PREVIOUS> to scroll through your choices until
<QALERT HORN OPERATION> is displayed and then press <ENTER>.
Press <NEXT> or <PREVIOUS> to choose the settings shown in Table
6.
7-2.
Table 7-2. Audible and Visual NAC Operation Settings
System Option
TrueAlert Non-Addressable
Horn Operation
* Default Settings
Follow the prompts to confirm this action.
7-10
Choices
Choose:
•
Temporal*
•
Steady
•
Slow March
Advertisement
Table of Contents
Need help?
Do you have a question about the 4010 and is the answer not in the manual?
Questions and answers
On a 4010 what is point label 4009A trouble. I **** not familiar with this
A point label trouble on a Simplex 4010 related to a 4009A booster may indicate that the point assigned to the booster is not properly configured or is experiencing communication issues. This could be due to incorrect dip switch settings, wiring issues, or the point type not being correctly set in the system configuration. All 4009 NACs are automatically set for Class B operation and assigned a point type of SSIGNAL, but manual programming may be needed if Quick CFIG does not resolve the issue.
This answer is automatically generated