Chapter 5. Configuring Cards; Overview; In This Chapter - Simplex 4010 Installing And Operating Insructions
Front panel
Hide thumbs
Also See for 4010:
- Applications manual (85 pages) ,
- Service manual (72 pages) ,
- User manual (9 pages)
Table of Contents
Advertisement
Overview
In this Chapter
Technical Manuals Online! - http://www.tech-man.com
Chapter 5
Configuring Cards
The 4010 allows you to manually configure each option card in the system. This
chapter describes how to add, delete, or modify optional cards in the 4010
FACP.
Note:
The system must be powered down before cards are added to
the system.
This chapter discusses the following topics:
Card Addresses
Adding, Deleting, or Modifying 4010 Cards
5-1
Topic
See Page #
5-2
5-3
Advertisement
Table of Contents
Need help?
Do you have a question about the 4010 and is the answer not in the manual?
Questions and answers
On a 4010 what is point label 4009A trouble. I **** not familiar with this
A point label trouble on a Simplex 4010 related to a 4009A booster may indicate that the point assigned to the booster is not properly configured or is experiencing communication issues. This could be due to incorrect dip switch settings, wiring issues, or the point type not being correctly set in the system configuration. All 4009 NACs are automatically set for Class B operation and assigned a point type of SSIGNAL, but manual programming may be needed if Quick CFIG does not resolve the issue.
This answer is automatically generated