Setting The Time And Date - Simplex 4010 Installing And Operating Insructions

Setting the Time and Date

Technical Manuals Online! - http://www.tech-man.com
Use Steps 1 through 5 and Figures 11-6 to set the time and date.
An accurate time and date setting is essential to the proper operation of the 4010
system. The time and date should be checked at least once a month and reset, as
described below, if necessary.
1. From the High-Level Status screen, press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [Set Time/Date] is displayed and
then press <ENTER>.
3. Press <ì> or <ö> to move the focus brackets to the desired field (hours,
minutes, date, month, year).
4. Press <NEXT> or <PREVIOUS> until the desired value is displayed.
Once all fields are set, press <ENTER> to set the time and date.
5.
Top Level Menus
Diagnostics
Time/Date
Figure 11-7. Set Date/Time
11-14
Set Walk Test
•
Hours
•
Minutes
•
Date
•
Month
•
Year