Passcodes, Access Levels, And Logging In And Out; Overview; Passcodes And Access Levels - Simplex 4010 Installing And Operating Insructions

Passcodes, Access Levels, and Logging In and Out

Overview

Passcodes and Access Levels

Technical Manuals Online! - http://www.tech-man.com
Certain operator functions of the 4010 are passcode protected at different levels.
This section describes logging in and out at specific access levels.
All operations in the 4010 are protected at a preset level with designated
passcodes to access these operations. The table below shows the basic
operations and menu choices for specific access levels. The default passcodes
are listed for Levels 2 through 4. Refer to the Menu Structure later in this
chapter for a complete quick-reference of the main 4010 FACP menus.
Table 1-2. Access Levels and Operations
ACCESS LEVEL
1
2
Passcode = 2000
3
Passcode = 3000
4
Passcode = 4000
1-12
OPERATIONS
Ack
Silence
System Reset
All Level 1 Operations, plus:
Set Time/Date
Point Control
Enable/Disable Points
All Level 1 & 2 Operations,
plus:
Clear Logs
Clear Verification Tallies
Programming
-
Edit/Clear Point Label
-
Restore/Save CFIG
TrueTest
Walk Test
Reports
All Level 1,2, & 3 Operations,
plus:
Quick CFIG
Run Diagnostics
Upload/Download
Programming
•
Edit Cards
•
Edit SMPL Program
•
System Options
Restart Panel
•
Warm Start
•
Cold Start
Continued on next page