Codes and Standards
*This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health
and Safety Code. See CSFM Listing No. 7170-0026:226 for allowable values and/or conditions for use concerning material
presented in this document.
Technical Manuals Online! - http://www.tech-man.com
The 4010 is listed for the following listing categories.
UL 864 Listings for Type of System:
•
UL 864 Power-Limited Fire Alarm Control Unit
•
Local (formerly NFPA 72A)
Requires the sounding of an alarm via listed notification appliance(s)
•
Auxiliary (formerly NFPA 72B)
Requires 4010-9809 City Circuit Module
•
Remote Station - protected premise (formerly NFPA 72C)
Requires 4010-9809 City Circuit Module or the 4010-9810 or -9816 DACT
•
Proprietary - protected premise (formerly NFPA 72D)
Requires 4010-9817 (with 4010-9818 or 4010-9819) or 4010-9821 Network
Interface Modules
•
Central Station - protected premise (formerly NFPA 71)
Requires 4010-9810 or -9816 DACT
•
Suppression Releasing Service
Requires 4010-9814 Suppression Kit
UL 864 Listings for Type of Service:
•
Automatic, Manual, Waterflow, and Sprinkler Supervisory
UL 864 Listings for Type of Signaling:
•
Coded, Non-Coded, March-Time and DACT
Requires the 4010-9810 or -9816 DACT
Factory Mutual Approved:
•
Same as UL above
Local Approvals:
•
CSFM*
•
MEA
•
City of Chicago (pending)
iii
Need help?
Do you have a question about the 4010 and is the answer not in the manual?
Questions and answers
On a 4010 what is point label 4009A trouble. I **** not familiar with this