Single-Station; Overview; Enabling Single-Station - Simplex 4010 Installing And Operating Insructions
Front panel
Hide thumbs
Also See for 4010:
- Applications manual (85 pages) ,
- Service manual (72 pages) ,
- User manual (9 pages)
Table of Contents
Advertisement
Single-Station
Overview
Enabling Single-Station
Technical Manuals Online! - http://www.tech-man.com
Single station has the following effect.
•
Sounder activates when the associated sensor is above its alarm threshold.
•
Sounder silences when sensor is below its alarm threshold.
•
Alarm remains at panel until reset is performed.
Use the following steps to set the Single-Station option on the 4010 FACP. The
default setting for this option is ON.
1.
Press <MENU>.
2.
Press <NEXT> or <PREVIOUS> until [PROGRAMMING] is displayed
and then press <ENTER>. A warning appears, indicating that the 4010 is
no longer in the Fire Alarm Operation mode.
3.
Press <ENTER> to continue.
4.
Press <NEXT> or <PREVIOUS> until <SYSTEM OPTIONS> is
displayed and then press <ENTER>.
5.
Press <NEXT> or <PREVIOUS> to scroll through your choices until
<SINGLE STATION OVERRIDE> is displayed and then press
<ENTER>.
Press <NEXT> or <PREVIOUS> to set the option to ON or OFF and then
6.
press Enter.
7.
Follow the prompts to confirm this action.
7-15
Advertisement
Table of Contents
Need help?
Do you have a question about the 4010 and is the answer not in the manual?
Questions and answers
On a 4010 what is point label 4009A trouble. I **** not familiar with this
A point label trouble on a Simplex 4010 related to a 4009A booster may indicate that the point assigned to the booster is not properly configured or is experiencing communication issues. This could be due to incorrect dip switch settings, wiring issues, or the point type not being correctly set in the system configuration. All 4009 NACs are automatically set for Class B operation and assigned a point type of SSIGNAL, but manual programming may be needed if Quick CFIG does not resolve the issue.
This answer is automatically generated