Simplex 4010 Installing And Operating Insructions page 69

Configuring ZAM/IAM/RIAM Points,
Editing a ZAM/IAM/RIAM Point
(continued)
Technical Manuals Online! - http://www.tech-man.com
Continued
Use <NEXT> or <PREVIOUS> to scroll through your choices until <Edit
6.
IDNet Point> is displayed and then press Enter.
Press <NEXT> or <PREVIOUS> to scroll through your list of
7.
ZAM/IAM/RIAM points until the desired point is displayed and then press
Enter.
Press <NEXT> or <PREVIOUS> to scroll through your list of choices until
8.
the desired option is displayed and then press Enter. Your choices are
shown in Table 6-2.
Table 6-2. ZAM/IAM/RIAM Configuration Choices
Function Description
Edit Device Type Changes the Hardware Device Type of the Point
(See Notes 2 and 3)
Edit Point Type Changes the Software Point Type of the Point
(See Notes 2 and 3)
Edit Point Label Changes the 40-Character Label of the Point
(See Note 3)
Clear Point Label Blanks the 40-Character Label of the Point
(See Note 3)
Edit Mode Changes the Mode of Operation for the Point
(See Note 1)
Notes:
1. This function not allowed for ZAM/IAM/RIAM points.
2. For a complete list of your choices for these edit functions, refer
to "Appendix A. Device and Point Types."
3. To complete these functions, refer to their appropriate section
in this publication.
6-7
Continued on next page