Setting Of Lcd Screen; Screen Display Of [Monitor Mode] - Toshiba TOSVERT VF-AS3 Instruction Manual

Memo
• For details of how to set parameters, refer to [4. 2. 3].

■ Screen display of [Monitor mode]

This is a display mode to monitor the inverter status (output current, input voltage, terminal
information, etc.).
(1) From the operation status to the current time, this mode has the same display as [Standard
mode].
(2) The current display mode [Monitor mode] is displayed.
(3) The monitor items are displayed. One screen can display up to five items.
"Left end": Monitor item name
"Right end": Value, status
Furthermore, if
detailed information is displayed when you press the [OK] key.
(4) The functions assigned to the [F1] - [F4] keys are displayed.
For details, refer to [3. 1. 1].
Memo
• For details of [Monitor mode], refer to [Chapter 8].
3. 1. 3

Setting of LCD screen

• Note that if power off or a power failure occurs while the setting of the LCD screen is being
changed, the LCD screen information is lost, and you may not be able to use the operation
panel.
Important
When you press the [F2] key ("Screen") in [Standard mode], the LCD setting screen is displayed.
This screen allows various settings of the LCD screen such as selection of display language, setting of
current date/time, link to the website, adjustment of contrast, and automatic off time.
(1)
STOP
Status Monitor Mode
(2)
Direction of rotation
Output current
Frequency reference
(3)
DC bus voltage
Output vol with filter
Top View Easy
(4)
is displayed in the [F4] key when selecting an item with the touch wheel,
3-9
0.0Hz
12:38
Forward
0%
20.0Hz
0%
0%
Parameter
3. [Basic operation] Operation panel and screen display
E6582062
3
9
10