■ Mounting (Option slot A, B)
1
Remove the front cover and other parts.
Covers to be removed at the time of wiring vary
depending on the frame size.
For how to remove, refer to [2. 2].
2
Insert a cassette option to the option slot A, B until
you hear a click sound.
3
Perform wiring to the cassette option.
4
When wiring is complete, mount the removed
cover.
For how to mount them, refer to [2. 2].
■ Removing (Option slot A, B)
1
Remove the front cover and other parts.
Covers to be removed vary depending on the frame size.
For how to remove, refer to [2. 2].
2
Remove wiring to the cassette option.
3
While pressing the release tab down, pull the cas-
sette option to remove from the option slot.
4
Mount the removed covers.
For how to mount them, refer to [2. 2].
Option slot
Cassette
option
Insert until you hear a
click sound.
Release tab
10-15
10. Selection and installation of peripheral devices
E6582062
Control terminal
block
3
9
10