Setting Example Of Parameters Of Input Terminals - Toshiba TOSVERT VF-AS3 Instruction Manual

Run command clear
Inverter does not restart after coast stop or occurrence of the power circuit undervoltage (MOFF)
alarm.
Press the [RUN] key to operate it again in panel run. Turn on the run command in RS485
communication run.

■ Setting example of parameters of input terminals

Set necessary function to the unused input terminal. For details, refer to 7. 2. 1].
"6: Standby"
"96: Coast stop"
• How to operate the operation panel -> Refer to [3. 1. 1].
• How to switch display mode on the operation panel -> Refer to [3. 1. 2].
Reference
• Procedure to change parameter setting -> Refer to [4. 2. 3]
• Details of operation by external signals -> Refer to Chapter 7
6-173
E6582062
6. [Advanced] How to use parameters
3
4
6
9