Toshiba TOSVERT VF-AS3 Instruction Manual page 371

1: Coast stop
Coast stop.
Alarm "A-18" blinks.
2: Run by F649
The inverter runs with the frequency setting by <F649: Fallback frequency>.
Alarm "A-18" blinks.
3: Continue running
Continue running.
Alarm "A-18" blinks.
4: Deceleration stop
Deceleration stop.
Alarm "A-18" blinks.
• Depending on the degree of deviation of the analog data detected, disconnection may be
Memo
detected too early.
• How to operate the operation panel -> Refer to [3. 1. 1].
• How to switch display mode on the operation panel -> Refer to [3. 1. 2].
Reference
• Procedure to change parameter setting -> Refer to [4. 2. 3].
• Details on operation by external signals -> Refer to [Chapter 7].
6-143
E6582062
6. [Advanced] How to use parameters
3
4
6
9