Toshiba TOSVERT VF-AS3 Instruction Manual page 136

7 Switch to [Setting mode].
Select "4. Basic parameter" and press the [OK]
key. The basic parameter screen is displayed.
8 Select <CMOd: Run command select> and press
the [OK] key.
You can also select <CMOd: Run command
select> on the [Easy mode] screen.
4
The setting screen is displayed.
9
9 Select "0: Terminal" and press the [OK] key.
The basic parameter screen is displayed.
Check that the setting value of <CMOd: Run
command select> is "0."
10 Select <FMOd: Frequency command select 1> and
press the [OK] key.
The setting screen is displayed.
4. [Basic operation] Operation methods of motor
1. History function
2. Direct access
3. Guidance function
4. Basic parameters
5. Extended parameters(F - - -)
Top
: Run command select
CMOd
: Frequency command select 1
FMOd
: V/f Pattern
Pt
: Manual torque boost 1
vb
: Base frequency 1
vL
CMOd :Run command select
1: Operation panel,Ext panel
2: Embedded Ethernet
3: RS485 com (connector 1)
4: RS485 com (connector 2)
5: Communication option
CMOd :Run command select
0: Terminal
1: Operation panel,Ext panel
2: Embedded Ethernet
3: RS485 com (connector 1)
4: RS485 com (connector 2)
: Run command select
CMOd
: Frequency command select 1
FMOd
: V/f Pattern
Pt
: Manual torque boost 1
vb
: Base frequency 1
vL
4-28
E6582062
STOP 0.0Hz
15:13
Setting Mode
Monitor
STOP 0.0Hz
15:51
Basic parameters
1
10
0
4.80%
60.0Hz
STOP 0.0Hz
15:51
STOP 0.0Hz
15:51
STOP 0.0Hz
15:52
Basic parameters
0
10
0
4.80%
60.0Hz