Connection Of Control Circuit; Standard Connection Diagram - Toshiba TOSVERT VF-AS3 Instruction Manual

• For the layout and shape of power terminal block of each frame size, refer to [2. 3. 3].
• The cable clamp exists only in frame size A1 to A5.
Memo
• Covers to be removed at the time of wiring vary depending on the frame size. For details, refer
to [2. 2].

■ Connection of control circuit

• The input/output of the control circuit consist of digital input x 8 points, analog input x 3 points,
analog output x 2 points, relay contact output x 3 points, etc. In many cases, the function of input/
output can be switched with parameter setting.
• For the function and electrical specification of each terminal, refer to [2. 3. 5].
• For details of how to operate with terminal input, refer to [4. 4].
For an example of wiring of the control circuit, refer to the "■Standard connection diagram".

■ Standard connection diagram

This diagram shows a standard wiring of the power circuit and control circuit.
2-27
E6582062
10
2. Installation and wiring
2
3
9