Toshiba TOSVERT VF-AS3 Instruction Manual page 57

4 Pass the motor wiring through the cable clamp.
The cable clamp exists only in frame size A1 to A5.
5 Mount the motor wiring to the screw of each corresponding terminal.
Mount ferrules with insulation sleeve terminal and crimp-style terminal with insulation sleeve to
the end of each wire of the motor in advance. For cautions, refer to "■Wiring" of [2. 3. 1].
6 Tighten the screws of the terminals [U/T1], [V/T2], and [W/T3] and a terminal [PE].
For the recommended tightening torque, refer to "■Recommended tightening torque of power
terminal screws" of [2. 3. 3].
2-25
E6582062
Cable
Pass the cable
Tighten screws (x4)
2. Installation and wiring
2
3
9
10