Basic Setting Methods Of Parameters; Terminal Run; Communication Run; [Setting Mode] And [Easy Mode] - Toshiba TOSVERT VF-AS3 Instruction Manual

Memo
• For how to switch other operation method to panel run, refer to [4. 3], [5. 1. 1].

■ Terminal run

The motor is operated with an external signal.
Run/stop the motor with an ON/OFF signal to a digital input terminal. Also, input the frequency
command with potentiometer/voltage/current signals to analog input terminals.
Memo
• For how to switch other operation methods to terminal run, refer to [4. 4], [5. 1. 1].

■ Communication run

The motor can be operated with an RS485 communication or Ethernet. Connect cables to RS485
communication connector 1 and 2 for the RS485 communication or to Ethernet connector 1 and 2
for the Ethernet communication. By inserting cassette options (PROFINET, etc.) to optional slots A
and B, other communication run is also made possible.
For details, refer to "Communication Function Instruction Manual".
4. 2

Basic setting methods of parameters

This inverter has four kinds of display modes as described in [3. 1. 2]. Switch to [Setting mode] (or [Easy
mode]) and set parameters.
On the setting screen of a parameter, the title, name, and setting value of the parameter are displayed.
Each parameter has a 4-digit communication number assigned separately from the title.
4. 2. 1

[Setting mode] and [Easy mode]

Two parameter setting methods are provided.
[Easy mode]
• Only ten basic parameters most frequently used are displayed.
• Up to 32 parameters can be registered to be displayed.
• To set parameters not displayed in [Easy mode], set to [Setting mode] to read them out.
• Since parameters registered in [Easy mode] are directly displayed on the [Easy mode] screen, you
can check or change them easily.
[Setting mode]
• This is a mode to set parameters of the inverter.
• All the basic parameters, extended parameters, and other parameters are displayed.
4-3
4. [Basic operation] Operation methods of motor
E6582062
3
4
9