Toshiba TOSVERT VF-AS3 Instruction Manual page 438

Terminal
symbol
Common
4
4
4
7
9
*1 The default setting value is depending on the setup menu. Refer to [5. 2. 10].
*2 Indicates optional. For details, refer to [10. 4. 1].
*3 If stable operation cannot be achieved because of noise of the frequency command circuit, etc., increase the value for <F209: Analog input
filter>.
For details on switching two types of analog signals for operation, refer to [5. 3. 1].
7. Operating using external signals
Title Parameter name
F209 Analog input filter
A959 Analog input function target
11
A961 Analog function setting desti-
nation 11
A962 Analog input function target
21
A964 Analog function setting desti-
nation 21
Adjustment range
1: Disabled
2 - 1000 (ms)
0: Disabled
1: Terminal RR
2: Terminal RX
3: Terminal II
4: Terminal AI4
5: Terminal AI5
0: Disabled
1: Acc/Dec rate (ACC.dEC etc.)
2: Upper limit frequency (UL)
3: Acc multiplication factor (FH/
ACC etc.)
4: Dec multiplication factor (FH/
dEC etc.)
5: Manual torque boost (vb etc.)
6: Stall prevention level (F601 etc.)
7: Motor OL protection current
(tHrA)
8: Speed control response (F460
etc.)
9: Droop gain (F320 etc.)
10: PID proportional gain (F362
etc.)
11: Base frequency voltage (VL
etc.)
12 - 20: -
Same as A959
Same as A961
7-16
E6582062
Default
setting
*3
1