Screen Display Of [Standard Mode] - Toshiba TOSVERT VF-AS3 Instruction Manual

■ Screen display of [Standard mode]

This is the normal display mode of the inverter.
(1) - (6) are display contents common to [Standard mode], [Setting mode], [Easy mode], and [Monitor
mode].
(1)
(2)
(7)
(8)
(9)
(10)
(1) The operation status is displayed with the following symbols.
(Rotating): In operation (clockwise for forward run, counterclockwise for reverse run)
: Stop
(Blinking): Waiting for emergency off applied with the [STOP/RESET] key (when you
press the [STOP/RESET] key again while the symbol is blinking, the motor comes to an
emergency off)
(2) The operation status is displayed with the following text.
"RUN": During run
"STOP": Stopped
"Trip": Trip has occurred
"JOG": In jog run
(3) The output frequency (default setting) is displayed in Hz. Set the display contents with <F723:
Status area display of operation panel>.
For details, refer to [5. 3. 3].
(4) The run commands are displayed with icons.
: Run
: Stop
(5) The remaining capacity of the battery (
(6) The current time ("hour/minute") is displayed.
(7) Current display mode
[Standard mode] is displayed.
(8) Normally, the output frequency (default setting) is displayed. Set the display contents with
<F710: Standard mode display>. For details, refer to [5. 3. 3].
When an alarm or trip occurs, its contents are displayed.
(9) When an alarm or trip occurs, the name of the alarm and a message are also displayed here.
(10) The functions assigned to the [F1] - [F4] keys are displayed.
For details, refer to [3. 1. 1].
Memo
• When emergency off, alarm, or trip has occurred, refer to [3. 2] and [Chapter 13].
RUN 20.0Hz
Top View Mode
20.0
Easy Keypad Copy
yes/ no) is displayed with icons.
3-7
3. [Basic operation] Operation panel and screen display
E6582062
(4)
12:40
(6)
(5)
(3)
Hz
Monitor
3
9
10