Meter Setting And Adjustment - Toshiba VFNC3-2001P Instruction Manual

efesotomasyon.com -Toshiba inverter,drive,servo,plc
3.4

Meter setting and adjustment

 : Meter selection
 : Meter adjustment gain
• Function
Output of 0 - 1 mAdc, 0 (4) - 20 mAdc, 0 - 10 vdc can be selected for the output signal from the FM
terminal, depending no the  setting. Adjust the scale at .
Use an ammeter with a full-scale 0 - 1 mAdc meter.
The  (analog output bias) needs to be adjusted if output is 4 - 20 mAdc.
[Connected meter selection parameters]
Title Function
Meter

selection
Meter
adjustment

gain
Adjustment range
0: Output frequency
1: Output current
2: Frequency reference
3: Input voltage (DC detection)
4: Output voltage (command value)
5 - 11: -
12: Frequency setting value (after
campensation)
13: VI input value
14: -
15: Fixed output 1 (output current 100%
equivalent)
16: Fixed output 2 (output current 50%
equivalent)
17: Fixed output 3 (other than the
output current)
18: RS485 communication data
19:For adjustments ( set value is
displayed.)
20 - 22: -
-
C-13
Supposition output at
Default setting
fsl=17
Maximum frequency ()
-
Maximum frequency (fh)
1.5x rated voltage
1.5x rated voltage
-
Maximum frequency (fh)
Maximum input value
-
-
-
-
Maximum value (100.0%)
-
-
-
E6581595
3
0
-