Toshiba TOSVERT VF-AS3 Instruction Manual page 94

• [ECS] key
This key switches the display mode.
It is also used to return to the previous item of the hierarchy of the screen.
• [HAND/AUTO] key
This key switches between hand (operation panel)/remote (remote control).
It is used to operate the inverter temporarily at hand (operation panel) while performing terminal operation
(remote control) normally.
To enable this key, set the parameter <F750: EASY key function>.
For details, refer to [6. 37].
• [RUN] key
This key is used for a run command from the operation panel.
3
To enable this key, set "1" to the parameter <CMOd: Run command select>.
For details, refer to [5. 1. 1].
• [FWD/REV] key
This key switches between forward run and reverse run of the motor during panel run.
It is enabled when the parameter <CMOd: Run command select> is "1" and <Fr: Panel Fwd/Rev run
select> is "2" or "3".
For details, refer to [5. 2. 9].
• [i] key
This key displays information.
Normally, model information is displayed.
- Type
- Multi-rating
9
- Rated voltage
- Rated output capacity
- Rated output current
- CPU 1 version
- CPU 2 version
- Serial number
- Setting by region
Necessary information is displayed when a trip occurs.
• [STOP/RESET] key
This key is used for a stop command from the operation panel.
To enable the stop command by this key, set "1" to the parameter <CMOd: Run command select>.
For details, refer to [5. 1. 1].
Emergency off can be applied to the inverter except when it is operated by the operation panel. When
you press this key,
applied.
For details, refer to [3. 2. 3].
It is also used as a reset key when a trip occurs. The inverter can be reset by pressing this key twice in
succession when a trip occurs.
For details, refer to [3. 2. 4].
3. [Basic operation] Operation panel and screen display
blinks. When you press it again, "E" is displayed and the emergency off is
3-2
E6582062