Toshiba TOSVERT VF-AS3 Instruction Manual page 279

When you do not want to pass on the run/stop state and output frequency under the automatic
operation to the manual operation, set <F295> to "0: Disabled".
• How to operate the operation panel -> Refer to [3. 1. 1].
Reference
• How to switch display mode on the operation panel -> Refer to [3. 1. 2].
• Procedure to change parameter setting -> Refer to [4. 2. 3]
6-51
E6582062
6. [Advanced] How to use parameters
3
4
6
9