Rush Current Suspension Relay Control - Toshiba TOSVERT VF-AS3 Instruction Manual

6. 30. 18 Rush current suspension relay control

<F635: Rush current suppression relay delay time>
■ Function
This function is used for DC input or when multiple inverters are connected with DC section and
4 when the rush current suspension resistor relay needs to be controlled.
■ Parameter setting
4
Title
6
F635
■ Guideline for the setting
When the voltage of DC section in the inverter has reached the specified voltage, after a lapse of
setting time by <F635: Rush current suppression relay delay time>, the rush current suspension
9
relay is turned on.
Rush current suppression relay
Reference
6. [Advanced] How to use parameters
Parameter name
Rush current
suppression relay delay
time
Voltage in the DC section
• How to operate the operation panel -> Refer to [3. 1. 1].
• How to switch display mode on the operation panel -> Refer to [3. 1. 2].
• Procedure to change parameter setting -> Refer to [4. 2. 3]
F635 : Rush current relay time
Min: 0.0
X1000
Adjustment range
0.0 - 2.5
<F635>
ON
6-146
E6582062
STOP 0.0Hz
14:03
0.0
S
Max: 2.5
X100 X10 X1
Unit Default setting
s 0.0