Top Cover Removal; With Frame Size A4 - Toshiba TOSVERT VF-AS3 Instruction Manual

Industrial inverter (for 3-phase motors)
Hide thumbs Also See for TOSVERT VF-AS3:
Table of Contents

Advertisement

■ Top cover
1
Put your fingers in the clearance in the back from the upper
side of the top cover, and pull the cover toward you while lift-
ing it upward.
The tab shown in the figure on the right comes off.
2
Important
2
Remove the top cover from the unit.
3
When mounting the top cover, put it on the top of the unit,
adjust the position of the tab, push the cover to fit in.
9
2. 2. 2
The parts to be removed are as follows.
• Front cover in the middle of the front surface (resin)
• Wiring cover on the lower side of the front surface
(resin)
• Top cover on the top surface (resin)
Each cover can be removed separately.
2. Installation and wiring
• Since the tab is engaged stiffly, removing the top cover can result in injury. Pay enough atten-
tion.

With frame size A4

VFAS3-2110P to 2185P, VFAS3-
4220PC to 4370PC
Top cover
Front cover
Wiring cover
2-12
E6582062
Top cover
Top cover
Tab
Tab
Tab
Tab
(A1, A2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents