Normal/Emergency Screen Display - Toshiba TOSVERT VF-AS3 Instruction Manual

3. 2
This section explains the screen display of the operation panel.
When operation such as parameter setting is not performed, the top screen of [Standard mode] is
displayed. During run, output frequency, etc. are displayed, and the status of alarm and trip is displayed
when an error occurs.
3. 2. 1
When the inverter is stopped, the screen on the right is
displayed.
3
Status area
• at the left end is stopped
• As status, "STOP" is displayed.
• The output frequency "0.0 Hz" is displayed (<F723:
Status area display of operation panel> = "0: Output
frequency")
Main area
• The output frequency "0.0 Hz" is displayed
During run of the motor, the screen shown on the right is
displayed.
9
Status area
• at the left end rotates
• As status, "RUN" is displayed
• The output frequency ("20.0Hz" in the example on the
right) is displayed (<F723: Status area display of
operation panel> = "0: Output frequency")
Main area
• The output frequency "20.0Hz" is displayed
Even if [Standard mode] is switched to other display mode,
you can grasp the operation status from the display in the
status area.
3. [Basic operation] Operation panel and screen display

Normal/emergency screen display

Normal display
Easy
Easy
Direction of rotation
Output current
Frequency reference
DC bus voltage
Output vol with filter
Top View
3-12
E6582062
STOP 0.0Hz
12:37
Top View Mode
0.0
Hz
Keypad Copy Monitor
RUN 20.0Hz
12:40
Top View Mode
20.0
Hz
Keypad Copy Monitor
RUN 20.0Hz
12:40
Status Monitor Mode
Forward
0%
20.0Hz
0%
0%
Easy Parameter