Toshiba TOSVERT VF-AS3 Instruction Manual page 125

8 Select a new setting value.
Select it by using the touch wheel, the [F2] key
and the [F3] key
In the example on the right, the setting value is
changed to "2: Output current."
9 Press the [OK] key.
The setting value is changed. The screen display
returns to the previous screen (previous one in the
hierarchy), and the screen of the panel parameter
is displayed.
Check that the number displayed at the right end of
the item <F710: Standard mode display> has been
changed ("0" -> "2" in the example on the right).
10 Press the [ESC] key.
The screen display returns to the previous one,
and the extended parameter screen is displayed.
11 Press the [F1] key ("Standard") and return to
[Standard mode].
In the example on the right, the display in
[Standard mode] has been changed to output
current (displayed in %). When you press the [F4]
key/[ESC] key, the mode is switched to [Monitor
mode].
• For details of the function and adjustment range of <F710: Standard mode display>, refer to [5.
Memo
3. 3].
.
4-17
,
STOP 0.0Hz
A710 : Standard mode display
0: Output frequency
1: Frequency reference
2: Output current
3: DC Bus voltage
4: Output voltage
STOP 0.0Hz
Extended parameters (F ---)
: Free unit bias
A706
: Step of panel setting
A707
: Step of panel display
A708
: Standard mode hold
A709
: Standard mode display
A710
F7 --
STOP 0.0Hz
Extended parameters (F ---)
Operation parameters (F3 - -)
3.3
Motor parameters 1 (F4 - -)
3.4
Acc/dec parameters (F5 - -)
3.5
Protection parameters (F6 - -)
3.6
Panel parameters (F7 - -)
3.7
Top
STOP 0.0Hz
Standard Mode
Easy Screen
4. [Basic operation] Operation methods of motor
E6582062
15:08
3
15:09
4
0.00Hz 0
0.00Hz
0
0
2
F8 --
15:09
0
9
Monitor
15:10
0
%
Copy Monitor