Instrument Configuration - Agilent Technologies 1260 Infinity II Quaternary System Manual

Instrument Configuration

Example shows an instrument configuration with a Diode Array Detector.
1 Set the switches of the Configuration switch at the rear of the module:
2 Enter the setup information (MAC / IP address and/or Instrument Name).
1260 Infinity II Quaternary System - Manual and Quick Guide
a All switches DOWN: module uses the default IP address 192.168.254.11.
b Switch 4 UP and others DOWN: module uses DHCP.
a Agilent OpenLab ChemStation (Configure Instrument):
Configuration Settings
Instrument Configuration
2
39